Circle Pureblood Warpwolf

Hey everyone! 
I just finished my Pureblood Warpwolf!

So I used a lot of the same methods and colors as the Argus but I wanted to stick to the idea of white fur. As a disclaimer, unless otherwise stated, I use Reaper paints. I started by base-coating with Armor Grey. I felt it was too dark so I covered it with a coat of Weathered Stone, which the combination ended up perfect for the start of the layers. I then used different layers of very thin mixes of Weathered Stone and Solid White, changing the ratio each time working up to straight white. I basecoated all the brown areas with Muddy Brown.The armor plates I used Mossy Green as the basecoat.

 

For the fur patches I  used GW Agarax Earthshade wash followed by highlighted Weathered Stone the with solid White as the finish. The brown I scale up with highlights using Leather Brown and Tanned Leather, adding a wash or the Earthshade here and there. The stitches are Golden Blonde. 

The green was shaded using mixes between Leaf Green, pale Green, and adding white where needed to highlight.

Next the NMM was done the same way as the Argus. I tried creating some stronger contrast this time. I actually messed up the legs and arms and had to redo them due to my paint being to thick and I didn't mix the shades enough. I used the line I created in the greens to create a single light effect.

The base was the same as the Argus but it came out a lot more uniform, which I didn't like. I used the GW Thraka Green wash, using a brush at an angle to create the line effect.

That is the basics! Let me know if you have any questions and leave any comments! Stay tuned for more soon!